One Point Alignment

One Point Alignment

Some users of EQMOD find that alignment on a single star is sufficient… particularly if used with a permanent installation.

Assumptions:
  • you have carefully polar aligned the mount.
  • you are not concerned about precise GOTO's.
  • there is minimal cone error.
  • the mount is reasonably level.
Procedure
  1. Clicking the [Clear Align Data] button.
  2. Add a single point by either the “Append on Sync” method or the “Dialog based” method.

The driver will operate in the “Nearest point” mode no matter what “Alignment Behavior” has been selected.

/home/welshdra/public_html/eqmod/data/pages/one_point_alignment.txt · Last modified: 2009/05/21 20:25 (external edit)
 
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki